Omega Speaker Systems OS523E User Manual Page 1

OS530LE, OS532E, OS53xE-CF, OS533E, OS534E, OS530HRE,OS523E, OS524E OMEGASCOPE®Handheld Infrared ThermometerShown withBuilt-in DistanceMeasuring Optio

1-3General Description1FeaturesOS530HRE OS530LE-CF OS533E-CF OS534E-CFAccuracy* 3°F (1.7 °C) ±1% rdg ±1% rdg ±1% rdgRange -22 to 250°F -10 to 1000°F

General Description11-4Distance to Spot Size RatioOS523E-1 30:1OS523E-2 60:1OS523E-3 68:1** OS523E provides three field of views:Features OS523E**OS52

1.2 Parts of the Thermometer1.2.1 Front of the ThermometerFigure 1-1. OS530E/OS520E Series Handheld Infrared Thermometer Front ViewThe display is s

General Description11-6Figure 1-2.Display andKeypad ViewTable 1-2. Display DetailsKey Description➀Display Mode displays one of the following:E (Emiss

1-7General Description1Figure 1-3 shows the various jacks for analog output, thermocouple inputand the ac adapter to the thermometer. The figures also

General Description11-8Notes

2-1Using the Handheld Infrared Thermometer22.1 How to Power the Thermometer2.1.1 Battery OperationInvert the thermometer and install 4 fresh AA size

Using the Handheld Infrared Thermometer22-22.2 Operating the Thermometer1a. (Without the Laser Sighting) -Aim the thermometer at the target tobe meas

2-3Using the Handheld Infrared Thermometer2** Measurement distance is from the outside surface of the rubber boot.4.8"1.0" @ 0" to 20&

Using the Handheld Infrared Thermometer22-4Figure 2-7 Field of View OS523E-22.9"0.9"@ 01.9"22mm @ 01.2"1.0"312648750.9"

Servicing North America:U.S.A.: One Omega Drive, Box 4047ISO 9001 Certified Stamford, CT 06907-0047Tel: (203) 359-1660FAX: (203) 359-7700e-mail: info@

2-5Using the Handheld Infrared Thermometer2Figure 2-8 Field of View OS523E-37.0".35"@ 24"1.6"9mm @ 610mm.8"2142181.9"22

Using the Handheld Infrared Thermometer22-63. The target temperature and emissivity are displayed on the LCD.Determine the emissivity of the target (r

2-7Using the Handheld Infrared Thermometer2• Static Surface Scan – Measures the temperature across a staticsurface:1. Aim the thermometer at a startin

Using the Handheld Infrared Thermometer22-81. Mount the thermometer on a camera tripod and aim at thetarget.2. Connect the analog output of the thermo

2-9Using the Handheld Infrared Thermometer2Table 2-1. Functional Flow Chart when the Trigger is Pulled (Real Time Mode)Press to... to...Press or to..

Figure 2-13. Visual Function Flow ChartLCKLALATCPRNMODE MODEDISPLAY DISPLAY☞☞☞☞☞☞☞☞☞LCK LCK LCK LCK LCK LCK LCK LCK LCK LCK ☞☞☞LCK LCK HAL☞LCK ☞LCK (

2-11Using the Handheld Infrared Thermometer22.3.1 Adjusting EmissivityRefer to Appendices B and C for information on emissivity.1. Determine the emis

2.3.4 Using the Distance Function• There should be a clean, open line of sight from the distance device to the target, otherwise an erroneous reading

Using the Handheld Infrared Thermometer22-13The built-in version (-DM) is an integal part of thethermometer, and distance measurment is made using the

Using the Handheld Infrared Thermometer22-14®HH-DMDISTANCE MEASURINGREFERENCE LINE30.0"0.5"@ 018.0"1.2 @ 010.0"6.0"251546760&

Unpacking Instructionsn4Notes

2.3.5 Laser Sighting StatusIn the LSR display menu, the status of the laser sighting is showneither as Flashing (FLS) or continuous (on). Pressing th

Using the Handheld Infrared Thermometer22-162.3.7 Changing the Temperature from °F to °C (or viceversa)During the time the thermometer displays eithe

2-17Using the Handheld Infrared Thermometer22.3.10 Using the Alarm FunctionsThe thermometer provides audible and visible alarmindications.• To set th

Using the Handheld Infrared Thermometer22-18The high alarm setpoint does not change when thethermometer is turned off. However, when thebatteries are

2-19Using the Handheld Infrared Thermometer22.3.11 Using Ambient Target TemperatureCompensation (OS533E, OS534E, OS523E, OS524E)Use the Ambient Targe

Using the Handheld Infrared Thermometer22-208. Press and hold the key until the Emissivity DisplayMode (E) appears.9. Change the emissivity to the pr

2-21Using the Handheld Infrared Thermometer2Sending temperature data to PC in Real Time:1. From Windows Operation System, Go to Start Program OmegaI

Using the Handheld Infrared Thermometer22-22The transmitted temperature data is the average temperature forthe specified data transmission interval. T

2-23Using the Handheld Infrared Thermometer2Menu DescriptionFileSave Data As...Save the collected temperature data in one of the formats:Excel File (.

Using the Handheld Infrared Thermometer22-24Stop Data Transmission to Change ParametersToolStop data transmission to be able to change parameter setti

Unpacking InstructionsRemove the Packing List and verify that you have received allequipment, including the following (quantities in parentheses):• OS

2-25Using the Handheld Infrared Thermometer22.3.13 PC Interface CommandsYou can communicate directly from the PC to the infrared thermometer. Hereare

Using the Handheld Infrared Thermometer22-26String DescriptionE:95; Emissivity is 0.95MAX:78; Maximum temperature is 78MIN:65; Minimum temperature is

2-27Using the Handheld Infrared Thermometer22.3.14 Storing Temperature Data on Command(OS534E, OS523E, OS524E)The thermometer can store up to 800 tem

Using the Handheld Infrared Thermometer22-282.3.15 Logging Temperature Data in Real Time (OS523E, OS524E,OS534E)The thermometer can log temperat

2-29Using the Handheld Infrared Thermometer22.3.16 Erasing the Temperature Data from MemoryThe user can erase all 800 temperature data points inmemor

Using the Handheld Infrared Thermometer22-302.4 Recall Mode (Passive Operation)Definition: Recall Mode is the passive operational mode ofthe thermom

2-31Using the Handheld Infrared Thermometer2Table 2-2. Functional Flow Chart (Recall Mode)Press to... to...Press or to...LOCKFFUNC – Disabled – C

Using the Handheld Infrared Thermometer22-322.4.1 Reviewing the Last ParametersThe thermometer stores the last temperature measured inthe real time m

3-1Laser Sighting33.1 Warnings and CautionsYou may receive harmful laser radiation exposure if you do not adhere to the warnings listed below:• USE O

Laser Sighting33-23.2 DescriptionThe Laser Sighting is built into the thermometer. It provides a visualindication of the field of view of the thermom

ii

3-3Laser Sighting33.3 Operating the Laser Sighting1. Set the laser power switch to the ON position as shown in Figure 3-2.2. Aim at the target and pu

The Laser Sighting turns on only when used with thethermometer. The module does not turn on by itself.The line of sight of the thermometer does not c

4-14.1 Sighting ScopeThe Sighting scope is an accessory for the thermometer. It provides a visualindication of the target being measured. Aiming at d

Sighting Scope44-2Pair of Mounting ClampsLine of sight ofthe sighting scopeLine of sight ofthe thermometer1 11/16 (42.8 mm)Figure 4-1. Installing the

5-1Digital Video Camera55.1 Camera Parts5.2 Battery InstallationYour camera runs on two AA alkaline batteries. High performance batteriesare recommen

Digital Video Camera55-2(1)(3)(6)(7)(4)(5)(2)(8)(9)(10)Self-TimerVoice RecordErase AllPicture QualityFormat CF cardBattery IndicatorPicture Resolution

6-1Maintenance66.1 Replacing the BatteriesWhen you change the batteries, all of the set parameters (i.e. emissivity, high alarm, low alarm, Target Amb

66-2Maintenance6.2 Cleaning the LensAlthough all lenses are quite durable, take care to prevent scratchingwhen cleaning them. To clean the lens:1. Blo

Troubleshooting Guide7THERMOMETERProblem SolutionThe thermometer does 1a. Properly install fresh batteries.not turn on (No Display)1b. If operating

Troubleshooting Guide77-2Problem SolutionThe thermometer is Remove and reinstall the batteries or“locked up” (the disconnect and reconnect the ac dis

TABLE OFCONTENTSPageUnpacking Instructions iChapter 1 General Description 1-11.1 Introduction 1-11.2 Parts of the Thermometer 1-51.2.1 Front of th

7-3Troubleshooting Guide7Problem Solution1. The thermometer has to stabilizebefore taking temperaturemeasurements. It takes up to 30minutes for the t

7-4Troubleshooting Guide7Notes

Specifications8(Specifications are for all models except where noted)THERMOMETERMeasuring OS530HRE, -30°C to 121°C (-22°F to 250°F)Temperature OS530LE

Specifications88-2Average Temperature Accuracy Time Period 30 days(under continuous operation):Emissivity: 0.10 to 1.00 in 0.01 increments, set via k

8-3Specifications8ac adapter: Optional - 100 to 240 Vac. 50-60 Hz, UL, CE, FCC, CE marketingOutput voltage: 9 Vdc at 1.7 AOutput plug (female): Center

Specifications88-4LASER SIGHTINGWavelength (Color): 630-670 nanometers (red)Operating Distance:Laser Dot 2 to 40 ft.Laser Circle 2 to 15 ft.Max. Outpu

8-5Specifications8DISTANCE MEASURING (Built-in-DM)Size 133 x 73 x 33mm (5.25" x 2.87" x 1.3")Weight 170 g Range: 0.9 to 9 m (3' t

Specifications88-6Notes

Glossary of Key Strokes99-1Key(s) Key(s) Functions• Selects one of the following DisplayModes:E , d-F, d-M, MAX, MIN, dIF, AVG, TC,HAL, LAL, AMB, PRN,

Glossary of Key Strokes99-2Notes

ivChapter 5 Digital Video Camera 5-15.1 Camera Parts 5-15.2 Battery Installation 5-15.3 Turning Camera ON/OFF 5-15.4 Menu Selection 5-1Chapter 6

A-1Appendix: How Infrared Thermometry WorksAThermal RadiationHeat is transferred from all objects via radiation in the form ofelectromagnetic waves o

Appendix: How Infrared Thermometry WorksAA-2BlackbodyWhen thermal radiation falls on an object, part of the energy istransmitted through the object,

A-3Appendix: How Infrared Thermometry WorksAWien’s Displacement Law describes the exact mathematicalrelationship between the temperature of a blackbo

Appendix: How Infrared Thermometry WorksAA-4Optics Field of ViewAccurate measurement of temperature via infrared means dependsstrongly on the size of

B-1Appendix: Emissivity ValuesBTable B-1 provides guidelines for estimating the emissivity of variouscommon materials. Actual emissivity, especially

Appendix: Emissivity ValuesBB-2NONMETALSMaterial Emissivity (ε)Asbestos Board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

C-1Appendix: Determining an Unknown EmissivityCIn Appendix A, we showed how emissivity is an importantparameter in calculating the temperature of an

Appendix: Determining an Unknown EmissivityCC-2Method 31. Use this method to measure objects at temperatures below 260°C(500°F).2. Place a large piec

C-3Appendix - Determining an Unknown EmissivityCMethod 41. Paint a sample of the object material with flat black lacquer paint.2. Set the emissivity t

Appendix: Determining an Unknown EmissivityCC-4Notes

1-1General Description11.1 IntroductionThe OS530E/OS520E series Handheld Infrared (IR) Thermometersprovide non-contact temperature measurements up to

I-1IndexIAac Adapter Input Jack ... 1-7Active Operation ... 2-9Aiming Sight “V Groove” 1-2, 1-5Alarms ...

IndexII-2FField of View: Diagrams ... 2-2 to 2-6Positions ... 2-2Fixed Point Monitoring overTime Measure

I-3IndexIMMain Display ... 1-4Modes:Real Time ... 2-8Recall ... 2-23, 2-25Mo

WARRANTY/DISCLAIMEROMEGA ENGINEERING, INC. warrants this unit to be free of defects in materials and workmanship for a period of25 months from date of

Where Do I Find Everything I Need forProcess Measurement and Control?OMEGA…Of Course!Shop online at omega.comTEMPERATURE䡺⻬Thermocouple, RTD & Ther

General Description11-2The thermometer is easy to use:• Units have standard “V” groove aiming sights.• Integral tripod mount permits hands-free operat